Post Processor Specialist

Precision Engineering Through Code.

CNC Post Processor Development & Machine Integration Services

CNC technical problem solving, software-to-machine integration, and custom post processor development for manufacturers who demand accuracy.

Explore Services Talk to an Expert

Serving CNC shops and cabinet makers in the USA, Australia, and worldwide

post_processor.def

; === CNC Post Processor ===
machine_type = "5-axis"
controller   = "Syntec / LNC / Fanuc"
 
; Tool change sequence
on_toolchange {
  M05          ; stop spindle
  G91 G28 Z0  ; Z home
  T[tool] M06 ; ATC call
  G43 H[tool] ; length comp
}
 
; Safe retract
on_retract {
  G49 G40 G80 ; cancel comp
  feedrate = safe_speed
}

// What we do

End-to-End CNC
Engineering Solutions

From diagnosing machine faults to writing production-ready post processors — we solve the hard problems.

⚙️

Post Processor Development

Custom post processor writing for any CAM software and CNC controller combination. Fully tested, production-ready output with safe retract, tool change, and cycle support.

Core Service Read the Full Guide →

🔌

Software Integration

Seamless data flow between CAD/CAM platforms and CNC machines. Eliminate manual G-code editing by making your software talk directly and correctly to your controller.

Integration Read the Full Guide →

🔧

Technical Problem Solving

Machine alarms, wrong tool paths, chatter, compensation errors — we diagnose and resolve CNC issues at the controller, post processor, or CAM strategy level.

Support Read the Full Guide →

📋

Post Processor Editing & Optimization

Upgrade or fix existing post processors. Improve cycle time, add missing features (probing, multi-axis RTCP, tool life management), or port to new controller firmware.

Optimization Read the Full Guide →

🖥️

CAM Software Configuration

Machine library setup, toolpath templates, material libraries, and workflow automation inside Mastercam, Fusion 360, Hypermill, and other platforms.

Setup Read the Full Guide →

📡

Remote & On-Site Support

Fast-response remote debugging via screen share or DNC. On-site visits available for complex multi-axis setups, machine retrofits, or first-article sign-off.

Support Read the Full Guide →

// New to CNC?

Setup, Training &
Business Consulting

Just bought a machine, learning CNC from zero, or planning to launch a CNC shop? We'll guide you every step of the way.

🚀

New Machine & Software Setup

Just bought a CNC machine? We'll get it running the right way — controller configuration, CAM software install and setup, post processor matching, and first-cut verification, from scratch to production-ready.

Onboarding Read the Full Guide →

🎓

Beginner to Pro Mentorship

One-on-one guidance for beginners — CAM basics, toolpath strategy, machine operation, and troubleshooting — structured to take you from your first program to confident, independent pro-level work.

Training Read the Full Guide →

💼

CNC Business Consulting

Planning to start a CNC business? We consult on the best software and hardware combinations for your budget and product line — machines, controllers, CAM platforms, and post processors that fit your workflow from day one.

Consulting Read the Full Guide →

// How it works

From Problem to Perfect G-Code

Briefing

Share your machine specs, CAM software, and controller model. Describe the problem or goal in detail.

Analysis

Review existing posts, NC files, and machine parameters. Identify root causes and integration gaps.

Development

Write or modify the post processor. Build and test against your toolpaths in a simulation environment.

Validation

Verify output G-code against controller requirements. Run dry cuts or backplot verification with you.

Delivery

Hand over files with full documentation. Ongoing support included for any post-deployment issues.

// Controller Support

CNC Controllers We Work With

Custom post processors built and tested for every controller below — matched to your exact firmware version, machine brand, and cutting requirements.

SYN

Syntec

CNC Router Controller

Full post processor development for Syntec controllers — widely used in woodworking CNC routers, nesting machines, and panel processing equipment. All Syntec firmware variants supported.

Woodworking Nesting Panel Routing

⭐ Primary

LNC

Motion Controller

Post processor writing and G-code optimization for LNC controllers — popular in Asian-market CNC routers and machining centres. Precise tool change, safe retract, and spindle control output.

CNC Routers Machining Centres G-Code

⭐ Primary

SCM

Woodworking Machine Controller

Specialist SCM router post processors — including Pratix, Morbidelli, and Accord series. Full nesting, drilling, routing, and edge-banding sequence support with correct M-code output.

Pratix Morbidelli Accord

⭐ Primary

BSE

Biesse

Woodworking CNC Controller

Post processor development for Biesse Rover, Skill, and Winstore series. BiesseWorks and B_SUITE integration — correct use of Biesse macros, clamping routines, and multi-tool cycles.

Rover BiesseWorks B_SUITE

⭐ Primary

FNC

Fanuc

Industrial CNC Controller

Comprehensive Fanuc post processor support — 0i, 16i, 18i, 30i, 31i, 32i series. RTCP (G43.4), macro B programming, canned cycles, and full 5-axis simultaneous machining output.

0i / 30i / 31i 5-Axis RTCP Macro B

⭐ Primary

Mach 3 / Mach 4

PC-Based CNC Controller

Post processor configuration and G-code output for Mach 3 and Mach 4 — the most popular PC-based CNC controllers. Router tables, plasma, laser, and mill configurations fully supported.

Mach 3 Mach 4 Router / Mill / Plasma

⭐ Primary

NCS

NC Studio

Software CNC Controller

Custom post processors for NC Studio (Weihong) — widely used in hobby and professional CNC routers. Correct spindle speed, feed rate, tool change, and safe-z output tailored to your machine config.

Weihong CNC Routers G-Code Output

⭐ Primary

// Post Processor Capabilities Across All Controllers

⚙️ Machine Axes 2.5 / 3 / 4 / 5-axis

🔄 RTCP / TCP G43.4 / TRAORI / M128

🛠️ Tool Compensation G40 / G41 / G42 + 3D

📡 DNC / Drip Feed RS-232 / Ethernet

🔍 Probing Cycles G31 / G65 Macros

⚡ High-Speed Machining G05 / AICC / HPCC

📋 Subprograms M98 / M99 / LCYC

🔧 Multi-Spindle / Turret Full B-axis Support

// Client Feedback

What Our Clients Say

Real feedback from real clients — shared directly on our Facebook page.

Sean Rafferty

7 min ago·🌐

★★★★★

Brilliant help with setting up my cnc. Very quick response time and no problem resolving any issues.
Thanks Muhammad

👍❤️

👍 Like 💬 Comment

Angelo Perone

5 days ago·🌐

★★★★★

I can not thank you enough for helping with my Cnc and programming.
If anyone needs help these guys are very helpful and open and honest.

👍❤️

👍 Like 💬 Comment

Vladimir Roman

23 Jan·🌐

★★★★★

I had serious issues with my CNC machine due to an incorrect post processor. The G-code generated from Vectric Aspire was not fully compatible with my controller, which caused errors, extra manual editing, and wasted time.

CNC Expert Solution quickly analyzed my setup and delivered a custom post processor perfectly matched to my machine. After the customization, the G-code runs smoothly with accurate tool changes and safe movements — no manual corrections needed.

The solution saved me time, improved accuracy, and made my workflow much more reliable. Highly recommended for anyone needing CNC post processor development or Aspire customization.

👍❤️

👍 Like 💬 Comment

Mike Coffman

23 Jan·🌐

★★★★★

The best solution I have ever found for support regarding post processor and Syntec controls. I am running a Syntec 60W-E controller on a Blue Elephant 1325 ATC R. I had error after error and could get nothing to run after losing my post processor in a computer crash. Blue Elephant has the worst customer service on earth, so I went looking for help.

CNC Expert Solution was found while doing a net search. Not only did they return my message immediately, by the end of the day we had written a new post processor and were debugging it. By the next day we had all of the setup errors I had created in the Syntec cleaned out and the post processor debugged to where it is working perfectly. I use Vectric Aspire 11.5 to write my toolpaths, and it works flawlessly.

Some of the best money I have ever spent on my machines. First call I will make if I ever have a Syntec or machine error. 10 out of 5 stars.

👍❤️

👍 Like 💬 Comment

Alex Snodgrass

3 Feb·🌐

★★★★★

CNC experts has been a huge help to me. If you are looking for someone to help you fix your machine or write a program this company is not only fast, efficient and affordable, but very kind and helpful.

👍❤️

👍 Like 💬 Comment

Josh Snyder

4 Apr·🌐

★★★★★

CNC Expert Solution is awesome, definitely a huge help with anything cnc related! They went above and beyond to help solve my post processor issue. If they don't know it they will figure it out and not stop till they do! Really awesome and honest. So grateful for their help. Any time I need cnc help I know where to go.

👍❤️

👍 Like 💬 Comment

Wawrzyniec Witczak

10 Mar·🌐

★★★★★

A very helpful person who tries to find solutions to problems. So far, I am satisfied with our cooperation.

👍❤️

👍 Like 💬 Comment

f View All Reviews on Facebook

fiverr. 5.0 ★★★★★ (9 verified reviews on Fiverr)

bretth81 — Australia

3 months ago·Fiverr